SAW STOP TABLE SAW

SAFTY REMINDERS:

  1. Don’t operate the machine alone. Always ask the shop manager before using the table saw.
  2. Follow the 3” rule; always keep your fingers at least 3” (80mm) from the blade.
  3. Keep a balanced stance at the saw. When ripping, never stand directly in front of the blade. 
  4. Never clear small pieces with your hand while the blade is moving.
  5. Use the guards provided whenever possible.
  6. If additional guards are needed, discuss this with the Shop Leader and make arrangements to get them.
  7. Never touch the blade when it is rotating, even if the saw is turned off.
  8. Never contact the blade with any metal object when it is rotating, even if it is turned off
  9. Always use a push stick or a push block when performing a rip cut.
  10. Give the work your undivided attention.
  11. Do not cut pressure treated, wet, or reclaimed wood on this saw.
  12. Turn the machine “OFF”, disconnect it from the power source, and clean the table/work area before leaving the machine. Lock the switch in the “OFF” position to prevent unauthorized use.