SEWING MACHINES

We have two of the Husqvarna Viking Emerald 118 sewing machines.

To begin sewing you need to have threaded machine and bobbin with thread that matches or compliments your piece. The photos below provide further explanation. After having pinned your materials together and selecting your stitch type, align your material to the machine and don’t forget to reach around to the back to lower the presser foot onto your material. The machine will not sew properly with the presser foot in the ‘up’ position and if something is going wrong this is often why. Also remember to reverse at the beginning and end of your stitches to strengthen them so they don’t un ravel.

Husqvarna Viking Emerald 118 Manual

Step by Step Machine Threading Instructions 

Turn on machine by flipping the power switch 

 Place thread spool on spool pin 

Place on the spool holder cap 

 

Wrap thread around the bobbin thread tension guide 

Thread the bobbin through the hole, coming from below and out the top 

Place bobbin on bobbin winder 

Push bobbin winder to the right 

 

Pull out hand wheel 

Hold end of thread up while pressing on the pedal allowing the thread to wind onto the bobbin 

Remove bobbin once it is full and push the handle back in

Remove plastic bobbin cover by pressing the black release 

Place bobbin into bobbin case with string going up and left (counterclockwise) 

Guide thread into notch on the bobbin case, pulling the thread to the left 

Bring thread from spool into the thread guide

Pull thread down the guide

Bring thread back up towards the lever  

Hook thread into the lever from right to left 

Bring thread down to the small hook above the needle and thread through back to front 

Thread eye of needle 

Hold top thread and crank hand wheel towards yourself until bottom thread from bottom comes up as a loop

Grab loop to pull bottom thread out and replace bobbin cover

Videos:

Bobbin Threading

 

Machine Threading

 

Stitch chart explanations

Machine Diagram: