Composite Materials and Mechanics Laboratory

Innovation in Lightweight Materials

Alumni

Ph.D. Theses Guided

  • Li, Q. Advanced cementitious materials for dynamic loading conditions, Spring 2024, New York University (Co-advised with Prof. Weihua Jin). (LinkedIn)
  • AbdelNour, Youssef. In-situ Monitoring in Additive Manufacturing for Quality Assessment and Defect Detection, 2023, New York University. (LinkedIn)
  • Mac, G. Cybersecurity risks and countermeasures in digital manufacturing cyber-physical systems, 2022, New York University.
  • Kaushik Yanamandre, 05/2022. New York University. (Linkedin)
  • Xianbo Xu. Multi-scale modelling of syntactic foams. 05/2020. New York University. (LinkedIn)
  • Ashish Kumar Singh. Manufacturing of feed material filament for 3D printing using syntactic foams. 05/2019. New York University. 
  • Fei Chen. Cybersecurity in additive manufacturing. 05/2019.  New York University. (Linkedin)
  • Yi Yang. Fiber-optic sensor. 05/2019. New York University.  (LinkedIn)
  • Adam, Mohamed I., 12/2016. New York University. (Webpage)
  • Xiang, C., Magnesium Alloy WE43 and WE43-T5 – Mechanical and Thermal Properties. 08/2016. New York University. (Linkedin)
  • Poveda, R., Carbon nanofibers reinforced multiscale composites: mechanical and thermal response. 06/2013. New York University. (Linkedin)
  • Shunmugasamy, V. C., Combined temperature and strain rate effects on properties of hollow particle filled composites. 12/2013. New York University. (Linkedin)
  • Luong, D. D., High strain rate compressive response of porous metal matrix composites. 05/2012. New York University. (Linkedin)
  • Tagliavai, G., Micromechanics of syntactic foams: viscoelastic behavior, elastic properties, mechanics of debonding, and moisture diffusion. 06/2011. Co-adviser: Maurizio Porfiri. New York University. (Linkedin)
  • Nguyen, N., Q. Development of fiber-optic sensors for structural health monitoring applications. 04/2009. New York University. (Linkedin)

M.S. Theses Guided

  • Jain, S. Metadata analysis for digital manufacturing data files. Fall 2023, New York University. (LinkedIn)
  • George, R. Investigating fused filament fabrication (FFF) process parameters. Spring 2023, New York University. Co-advisor: Marianna Maiaru, University Massachusetts, Lowell. (LinkedIn)
  • Bamido, E. Finite element analysis of additively manufactured composite materials. Advisor: Dung Luong, Co-advisor: Nikhil Gupta. Spring 2023, New York University. (LinkedIn)
  • Chen, G. L. Machining Learning Approaches to Predict Printing Orientation and Toolpath in Additive Manufacturing with Composite Material via Computerized Tomography Scan. Spring 2021, New York University. (LinkedIn)
  • Choi, Jun-Young. In-situ strain measurement during dynamic mechanical analysis. Fall 2021, New York University. (LinkedIn)
  • Chen, Yi. Biomedical model reconstruction and design of bone regeneration scaffold for solid freeform fabrication. (Co-advisor: P. Coelho). Spring 2018. New York University. 
  • Cola, Corrado, Material characterization by the modified shock tube. 12/2017. New York University. (LinkedIn)
  • Koomson, Chrys, Correlating elastic and viscoelastic properties of polymers. 12/2017. New York University. (Linkedin)
  • Ahmad I. Alaqeely, Investigating electronic properties of organic co-crystal. 05/2017. New York University. (LinkedIn)
  • Randhawa, P.S.,Fire retardant nanocomposite coating for wooden structures. 12/2016. New York University. (Linkedin)
  • Xu, Ruijiao, Biomedical device design for optimal endoscope stabilization. 12/2016.   New York University. (Linkedin)
  • Steven Eric Zeltmann, 12/2016. New York University (Linkedin).
  • Omar, M., Studies on metal matrix syntactic foam core sandwich composites. 05/2015. New York University. (Linkedin)
  • Yang, Yi, Blast response of syntactic foams, 05/2015. New York University. Co-advisor: Dr. D. D. Luong. (Linkedin)
  • Lee, Y.-T. Design of unicompartmental knee implants. 05/2014. New York University. (Linkedin)
  • Cox, J., Metal matrix syntactic foams with aluminum and lead matrix. 05/2014. New York University. (Linkedin)
  • Chen, K. A fiber-optic loop sensor for chemical sensing, 12/2013. New York University.
  • Poveda, R., Exploring carbon nanofibers for nanoscale reinforcement of microparticle reinforced lightweight composites. 04/2012. New York University. (Linkedin)
  • Nishino, Z., A fiber-optic loop sensor for environmental sensing. 05/2012. New York University. (LinkedIn)
  • John, D., Image based model development and analysis of the human knee joint. 06/2011 New York University. (Linkedin)
  • Sfreddo, A., and Ventura, C., Comparison of models for the effective moduli of syntactic foams on the base of finite element simulations. 06/2011. University of Brescia and New York University. Co-advised by Bardella, L. (UB) and Porfiri, M. (NYU-Poly). (LinkedIn – Sfreddo) (LinkedIn – Ventura)
  • Lee, K.-L., Understanding Elastic, Viscoelastic, and failure behavior of canine femoral bones to guide protective materials design. 05/2011. New York University. (Linkedin)
  • Branciaro q A. An experimental study on mechanical characterization of dog bones. 08/2010. New York University.
  • Shunmugasamy, V. C. Characterization of high strain rate response of engineered and natural composite materials. 06/2010. New York University. (LinkedIn)
  • Lee, S.-Y. Carbon nanofiber network sensor films for structural health monitoring applications. 06/2009. New York University. (LinkedIn)
  • Panchal, K. Development of a shock test method for characterization of shock response of materials. 06/2008. Co-advised with Dr. Iraj Kalkhoran. New York University. (LinkedIn)
  • Lin, T. C. Processing and characterization of lightweight high performance polymer matrix composite materials. 08/2007. New York University. 
  • Brar, B.S. Effect of some industrial wastes and minerals as fillers on mechanical properties of fibre reinforced PMCs. 05/1999. Punjab Engineering College (Now PEC University of Technology), Chandigarh, India. (LinkedIn)

M.S. Projects Guided

  • Zhao, S. Fusion Model for Defect Detection in 3D Printing Processes. Fall 2023. 
  • Chang, Judy. Attack vectors on streaming data in digital manufacturing and countermeasures, Spring 2023. New York University. 
  • Averardi, A. Development and integration of fiber-optic sensors with additive manufacturing. Summer 2017. (LinkedIn)
  • Cola, C. Development of shock test method for materials characterization. Summer 2017. New York University. (Co-advised with D. D. Luong).
  • Mac, G. CAD modeling strategies for improved manufacturability in additive manufacturing. Spring 2016. New York University. (LinkedIn)
  • Randhawa, P. S. Fire retardant nanostructured coatings for wood. Fall 2016. New York University. (LinkedIn)
  • Sharma, D. Development of a endoscope support device. Spring 2016. New York University.
  • Singh, A. K. Additive manufacturing of lightweight syntactic foam parts. Spring 2016. New York University. (LinkedIn)
  • Xu, R. Modeling of endoscope support device. Spring 2016. New York University. 
  • Xu, X. Simulation of high strain rate response of syntactic foams. Fall 2016. New York University.
  • Lamanna, E. Vibration response of metal matrix syntactic foam cores sandwich composites, 05/2015. New York University. (LinkedIn)
  • Ansuini, L. Blast response of metal matrix syntactic foams, 05/2015. New York University. (LinkedIn)
  • Gadaleta, A. Ultrasonic characterization of syntactic foams, 05/2015. New York University. (LinkedIn)
  • Singh, A. K. Composite materials in industrial applications, 05/2015. New York University. (LinkedIn)
  • Hu, S. Development of hemp fiber reinforced composites and their high strain rate characterization. 05/2014. New York University. (LinkedIn)
  • Anantharaman, H. Characterization of SiC hollow particle filled Mg matrix syntactic foams. 05/2014. New York University. (LinkedIn)
  • Cacucciolo, V. Finite element analysis of knee joint. 05/2013. New York University. (LinkedIn)
  • Librandi, G. Fiber optic sensor for structural health monitoring of composite materials. 05/2013. New York University. (LinkedIn)
  • Licitra, L. Dynamic properties of Al2O3 hollow particle reinforced A356 matrix syntactic foams. 05/2013. New York University. (LinkedIn)
  • Ashokan, R. Studies on wear response of particle filled composites. 12/2012. New York University. 
  • Deshmukh, A. Tribological properties of aluminum matrix composites. Fall 2011-Spring 2012. New York University. (LinkedIn)
  • Kumar, A. Electrical properties of vapor grown carbon nanofibers reinforced composites. Fall 2011-Spring 2012. New York University. (LinkedIn)
  • Achar, S. Thermal expansion of carbon nanofibers/epoxy composites. Fall 2011-Spring 2012. New York University. (LinkedIn)
  • Joshi, B. Microstructure and properties of SiCp/S-glass/Al matrix composites. Fall 2011. New York University. (LinkedIn)
  • Nikita Suponya. Impact characteristics of carbon fiber/epoxy laminates. Spring 2011. New York University. (LinkedIn)
  • Patel, V. Brazil nut effect in hollow particles. Fall 2010-Spring 2011. New York University. 
  • Prabhu, S. Ultrasonic properties of hollow particle filled composites. Fall 2008. New York University. (LinkedIn)

B.S. Theses Guided

  • Chen, F. Compressive characteristics of adhesively bonded carbon fiber laminates. 05/2015. New York University. (LinkedIn)
  • Ye, R. Fabrication and characterization of lightweight marine composites. 06/2011. New York University. 
  • Talalayev, A. Thermoanalytical characterization and weathering tests of epoxy matrix-glass microballoon syntactic foams. 06/2010. New York University. (LinkedIn)

Member of Dissertation/Thesis Committees

  • Jiarui Zhou, New York – Abu Dhabi, Advisor: Vijayvenkatraman Sanjairaj. (LinkedIn)
  • Susheem Kanwar, New York – Abu Dhabi, Advisor: Vijayvenkatraman Sanjairaj. (LinkedIn)
  • Roshan Saji Philips. New York University – Abu Dhabi, Advisor: Mostafa Mobasher. Committee Chair. (LinkedIn)
  • Olawale Makanjuola, New York – Abu Dhabi, Advisor: Raed Hashaikeh. Committee Chair. Defended 03/2024 (LinkedIn)
  • Wael Othman. Systems and Methods for Restoring Tactile Sensation In Laparoscopic Surgery. New York University – Abu Dhabi, Advisor: Mohammed Qasiameh. Committee Chair (LinkedIn)
  • Navajit Baban, New York University – Abu Dhabi, Advisor: Rafael Song. 2022. (LinkedIn)
  • Brimmo, A. Microfluidic Multipoles. New York University. Advisor: Mohammed Qasiameh (NYUAD). 2020. (LinkedIn)
  • Gollins, K. Characterization of Adhesive Joints Under High-Speed Normal Impact, Ph.D. Dissertation, City College of NY, 5/2018. Advisor: Feridun Delale. (LinkedIn)
  • Shams, A. Failure mechanics of syntactic foams with applications to marine environments. Ph.D. Dissertation, 12/2016. Advisor: Maurizio Porfiri. (LinkedIn)
  • Feuer, G. E. Time-dependent flexural properties of cortical bone. Ph.D. Dissertation, 5/2016, SUNY Downstate Medical Center, NY. Major advisor: S. Saha. (LinkedIn)
  • Suescun Florez, E. A Study of Strain Rate Effects on the Mechanical Behavior of Sand. 12/2015. New York University. Major advisor: Magued Iskender. (LinkedIn)
  • Omidvar, M. Phenomenological Investigation of Rapid Projectile Penetration in Granular Media, 08/2015. New York University. Major advisor: Magued Iskender. (LinkedIn)
  • Shin, S. Performance of embedded piezoelectric sensors in fiber glass epoxy composites. Ph.D. Dissertation, 02/2015, Mechanical Engineering, City College of New York, City University of New York. Major advisor: Niell Elvin. (LinkedIn)
  • Agarwal, M. Whispering Gallery Mode Biosensor: Dip Sensing and Power Effect. 9/2014. New York University. Major advisor: Iwao Teraoka. (LinkedIn)
  • Chaudhary, M. Optimization of Compartmental Knee Component Design for Medial Osteoarthritis. New York University. Major advisor: Peter Walker. 
  • Zamorano-Senderos, B. Passive impact damage detection on fiber glass composite panel. Ph. D. Dissertation, City College of NY, 12/2013. Major Advisor: Niell Elvin. (LinkedIn)
  • Jiang, N. Quality of ovariectomized rat tibia effect of synthetic bone mineral (SBM). Ph.D. Dissertation. 06/2012. Major Advisors: Racquel Z. LeGeros, New York University School of Dentistry and Subrata Saha, SUNY Downstate Medical Center. 
  • Fiorilli, F. Dissertation title: Control of complex networks: chaotic oscillators and animal grouping. Ph.D. Dissertation. 05/2011. Major Advisor: Maurizio Porfiri. (LinkedIn)
  • Xavier, F. Biomechanical testing of the compressive strength of various distal locking screw options for intramedullary nails in the treatment of tibia fractures. M.S. Thesis, 11/2011. Major Advisor: Subrata Saha, SUNY Downstate Medical Center. (LinkedIn)
  • Ahmed, M. Investigation of tunnel face stability and ground movement using transparent soil models. Ph.D. Dissertation, 01/2011, Major Advisor: Magued Iskendar, Civil Engineering Department. (LinkedIn)
  • Kashi, A. Microwave sintering of dental zirconia. Ph.D. Dissertation. 05/2010. Major Advisor: Subrata Saha, SUNY Downstate Medical Center. (LinkedIn)
  • Haddad, A. Creep of fiber reinforced polymer (FRP) piles. Ph.D. Dissertation, 01/2009. Major Advisor: Magued Iskendar, Civil Engineering Department. (LinkedIn)
  • Elsherif, O. Lateral buckling of horizontally curved beams. D. Dissertation, 12/2008. Major Advisor: Roula Maloof, Civil Engineering Department. (LinkedIn)
  • Ioppolo, T. Whispering gallery mode-based micro optical sensors for aerospace applications. Ph.D. Dissertation, 05/2008. Major Advisor: M. Volkan Otugen. (LinkedIn)
  • Wong, H. Formation design and nonlinear control of spacecraft formation flying. Ph.D. Dissertation, 12/2006. Major Advisor: Vikram Kapila. 

Post-Doctoral Fellows Advising

  • Priyanka Nama 01/2024-06/2024 (Lecturer, University of Rajasthan, Jaipur, India) (LinkedIn)
  • Hammond Pearce 03/2020-12/2022 (Assistant Professor, UNSW, Sydney, Australia) (LinkedIn)
  • Liwen Pan 03/2017-03/2018 (Associate Professor, Guangxi University)
  • Chongchen Xiang 03/2016-09/2016 (Assistant Professor, Soochow University)) (Google Scholar)
  • Vasanth C. Shunmugasamy 01/2014-12/2014 (Research Scientist, Texas, A&M) (LinkedIn)
  • Dinesh Pinisetty 02/2011-12/2012 (Dean, California Maritime Academy) (LinkedIn)
  • Michele Colloca 02/2010-01/2011 (Industry professional) (LinkedIn)
  • Nguyen Q Nguyen 06/2009-12/2009 (Industry professional) (LinkedIn)

Visiting Researchers

  • Nelson Wenger, Switzerland ETH, Switzerland, M.S. Thesis research (01/2020-03/2020) (LinkedIn)
  • Baohui Yang, China 
  • Fei Guo, China
  • Dr. Axel von Hehl, Germany AWT, Bremen, Germany (06/2019-07/2019) (LinkedIn)
  • Illaria Campioni, Italy PhD. Dissertation research (08/2016- 10/2016 | 08/2017-11/2017) (LinkedIn)
  • Laura Mera Álvarez, Spain, AIMEN Technological Center (09/2015-11/2015) (LinkedIn)
  • Dr. Dirk Lehmhus (DAAD Fellow), Germany Managing Director, ISIS Center, IFAM, University of Breman (6/2015-7/2015) (LinkedIn)
  • Dr. M. R. Doddamani, India, Assistant Professor, NIT-K (05/2015-06/2016) (LinkedIn)
  • Dr. L. R. Dumpala, India, Assistant Professor, JNTU, Kakinada (02/2015-03/2015) (LinkedIn)
  • Dr. R. N. Rao, India, Associate Professor, NIT, Warangal (09/2013-10/2013) (Google Scholar)
  • Kernin Arnaud, France, M.S. Thesis student (03/2015-07/2015) (LinkedIn)
  • Rajveer Bains, India, B.S. Thesis research (01/2015-05/2015)
  • Niklas Hoffman, Germany, B.S Student internship and M. S. Thesis research (03/2014-05/2014 | 06/2017-09/2017) (LinkedIn)
  • Alessandro Sfreddo, Italy, M. S. Thesis research (09/2010-2/2011) (LinkedIn)
  • Carlo Ventura, Italy, M. S. Thesis research (09/2010-2/2011) (LinkedIn)